68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | Making IIgs system software disks? | Posted by: Torbar on 2007-08-12 16:29:31
How would I do that using a Mac(doesn't matter what OS)
| Posted by: Twilight_Rodent on 2007-08-12 18:01:15
Well first you have to D/L them. From apple's site. Now comes the part where you have transfer them on to 3.5 disks. An older Mac with a 3.5 drive would be one of the easy ways to do it.
You need to have the 6, 800k disks formatted in prodos. From there you can transfer the d/ls to them.
I take it that you are wanting to set up a HD on the IIgs? Not sure what software you already have. The IIgs can not see HFS with out the FTS installed. I just sent someone a boot disk so he could D/L on to HFS(800K) disks and the IIg could read them. I think I had to remove the printer drivers to make room on the disk.
A lot of People use ADT to transfer with a serial cable or null modem cable.
Take Care,
| | 1 |
|