68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | MacTV | Posted by: defor on 2007-05-21 10:45:58
Finally grabbed myself a MacTV to disect and add to my collection of 5xx based systems, and wow is it unique in circuit design. Anyhow, there's a large chip missing from the drive bezel, and the rest of the case has wierd wear patterns (personally I didn't get it to collect), so the question I pose, as I do plan to keep it one way or another, try to restore it properly, or get gutsy and mod it into somehting far more glamorous?
| Posted by: Quadraman on 2007-05-21 10:58:10
What I would do, is try to find another one that doesn't run but has a nicer case. Until a nice original case comes along, though, I'd move the guts to an empty 5xx case if I had one laying around.
| Posted by: The Macster on 2007-05-21 11:09:03
As I asked in the other topic on Mac TVs, is it possible to paint a normal AIO LC case black and use the nameplates and innards of the Mac TV to make a perfect replica, or are the two cases different in ways apart from colour? Either way, there's only a few thousand of these around so I wouldn't mess around with it too much!
| Posted by: defor on 2007-05-21 11:14:13
well.. basically the case parts for the mactv are molded in black, not painted, for some reason mine has wierd lightish marks on it--- gave it a bath last night with heavy scrubbing and still cant get the majority off...
While I could move it to a 5xx case and paint it black, some issues liek the nameplate being part of the drive bezel which is missing a little corner make this a bad idea. right now, I'm contemplating looking into finding plastic finishing agents to fix the spotted marks which make no sense, then tracking down a front drive bezel in time to correct the crack.
I'd really love to find a second mactv motherboard though as well... have a really nifty project brewing around in the head and otherwise i'd have to swap this one back and forth between the mactv and the modded box...
good thoughts so far...
| Posted by: Maniacintosh on 2007-05-21 11:23:32
I tried to paint my Performa 575 black ---uuughh bad idea. It looked awful, so awful I didn't regret throwing it out (after removing the HD and mobo, of course).
| Posted by: joshc on 2007-05-22 10:43:34
Whoever votes Yes! or Put it in a normal 5xx beige case for the rest of its life. is going to get squashed by a Mac TV, by the looks of it. 🙂
| Posted by: Applemeister on 2007-05-24 15:54:31
You could also put it in a black 5500 or 5400 case. But, then again, you could always get a TV card for either of those machines and it'd be like a Mac TV, except 8 times faster 😉
| Posted by: Bunsen on 2007-05-25 13:08:00
Vinyl dye - it soaks into the plastic rather than sitting on the surface. And the nameplate should pop off if it's like the ones on other Macs - a pinhole through the bezel behind it, a pin, a push.
| | 1 |
|