68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| Macintosh LC very quiet speaker | |
| Posted by: Jon183 on 2017-11-07 18:11:49 Hi everyone, just received an LC that has not been recapped or anything like that, appears to be all original. I replaced the leaky TDK supply with a working ASTEC one, cleaned the board, installed a new PRAM battery and system 7.1 onto the HDD. Everything seems good except when I set volume to loudest, its ultra quiet, even when i plugged in headphones. What could be the problem? | |
| Posted by: Compgeke on 2017-11-07 18:32:49 Caps. | |
Posted by: IlikeTech on 2017-11-07 19:03:52Caps.Caps and more Caps | |
| Posted by: Jon183 on 2017-11-07 19:34:05 I better get busy in the holidays. Will need to recap 6 systems. | |
| Posted by: Scott Baret on 2017-11-07 19:39:29 All LCs get quieter when the caps are bad. Classics do the same thing. | |
| Posted by: Jon183 on 2017-11-08 01:51:14 All the old caps were removed safely, board cleaned, ROM's cleaned, will replace caps next week with tantalum on my LC, Classic II and LC475 and retrobrite the LC's. Ill share the final results of all 3 in good time. | |
| Posted by: Dog Cow on 2017-11-08 11:14:25 I've had this same problem on a Quadra 605 too. | |
| Posted by: AlpineRaven on 2017-11-09 12:54:59 Wouldve suspected it was the caps, That Macintosh LC used to be owned by Geelong Grammer school, I was too lazy to swap over the power supply - I suspected it was the PSU but couldn't be bothered with it - good luck with it Jon! Cheers AP | |
| Posted by: 68krazy on 2017-11-09 13:50:01 I had very faint sound on my SE/30 when I first bought it. New caps brought it back to regular volume. | |
| Posted by: Jon183 on 2017-11-10 06:44:29 I ordered Würth electrolytic caps for the system, I do have aluminium polymer and tantalum for the LC475 but my surface mount soldering isn't too good with my setup at home, so I thought these caps would make it easier. I did purchase solder paste though, im going to try that out for the LC475, if it works out, Ill buy tantalum for my future projects. | |
| Posted by: Jon183 on 2017-11-16 16:21:41 Replaced all the caps, forgot the 100uf 6v but I had one anyway, its an aluminium polymer cap. System chimes quite loud now. While it does boot into a floppy, the quantum pro drive probably doesn't work anymore, it was working last week. I will test the machine with a 40mb conner drive.  | |
| Posted by: Jon183 on 2017-11-20 22:59:14 Well, it works fine with the other HDD now. The LC is all sorted, will try and get an original monitor for it in December. | |
| 1 |