68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.
SE/30 + PGA Sockets + IIfxROM + SEEED PCB = Interrupted Insanity
Posted by: Trash80toHP_Mini on 2017-09-18 12:17:00 http://www.amiga-stuff.com/hardware/mc68030.html https://www.nxp.com/docs/en/reference-manual/MC68030UM.pdf https://www.nxp.com/docs/en/reference-manual/M68000PRM.pdf Was thinking about socketing the proc in my /30 and discovered I didn't need to. Found a set of four 68030 sockets for $14 on eBay,. The pinout/count's all wrong unless they're meant for an embedded version, but they look like they might work if I add three machine pin sockets on the inside corners. Before I crack eleven hundred some pages of PDF, I thought I'd ask about a ludicrous WAG. With the IIfx ROM SIMM on board, might the SE/30 be hoodwinked at the socket level into supporting all, most, one or another (additional) of the six possible NuBus Slot IDs its ROM/Architecture doesn't support as is? [}🙂] ]'>
1