68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| Finally fixed my LC 1 | |
| Posted by: Unknown_K on 2017-06-02 21:36:08 Finally got around to recapping the TDK power supply in my LC I. Was swapping supplies between it and my other LC machines when I needed to use it. Anybody run these with 2 floppy drives (only LC you can do that with)? | |
| Posted by: BadGoldEagle on 2017-06-03 00:24:10 I've got an LCII I need to recap before I part with it and actually you could run the LCII with two floppy drives because the pads are there. It just needs a header... and an LC 1 case with the two slots of course. | |
| Posted by: jack on 2017-06-03 18:53:45 FWIW, the LC II even has a hole in the metal part of the case for a floppy drive, just not the plastic.  | |
| Posted by: Johnnya101 on 2017-06-03 18:58:15 I saw that! What, they planned on putting in a second drive in? | |
| Posted by: jack on 2017-06-03 19:01:25 I presume it was just cost savings. Why get a new metal sheet designed when you don't need to? | |
| Posted by: Themk on 2017-06-03 19:05:39 Same with the logic board too. Why build a whole brand new logic board when you can just switch the CPU. Okay, I know some stuff had to change to support the 68030, but, it's a very similiar design | |
| Posted by: 360alaska on 2017-06-05 05:02:57 Awesome, MY LC is one of my favorite systems. | |
| Posted by: Unknown_K on 2017-06-05 13:35:33 I have mine running OS 6.08 with 8MB of RAM. Kind of like a flat headless SE. | |
Posted by: olePigeon on 2017-06-07 09:37:52Finally got around to recapping the TDK power supply in my LC I. Was swapping supplies between it and my other LC machines when I needed to use it.I run mine with a floppy drive on the right side, and a Magneto Optical drive on the left side. I've then mounted a small 2.5" SCSI-to-CF inside elsewhere. Edit: Found my old video of it. | |
| 1 |