68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.
Color classic dis-assembly question
Posted by: hunter44102 on 2017-04-08 07:33:15
After partially sliding out analog board, there are two soldered wires (red/black see pic)  preventing me from removing board from assembly. How do I get to the connection on the assembly to remove them. Also how do I remove hard drive? 

Yes I looked at service manual but didnt see it

20170408_102310.jpg
Posted by: EvilCapitalist on 2017-04-10 05:06:06
If I'm not mistaken, those wires are for the internal speaker.  If you unplug the speaker (should be sitting behind the floppy drive with the connector nearby) and take out the hard drive you should be able to pull the analog board out all the way since the cable will now be disconnected.
Posted by: bibilit on 2017-04-10 08:36:12
Yes correct, the speaker itself is fastened with a velcro on both ends, so can be removed easily.
1