| Click here to select a new forum. |
| Using a 180c in a 180 |
Posted by: haemogoblin on 2017-03-19 15:24:20
So I'm trying to side step screen tunnelling on my 180. All the research I've done suggests I'm on the right track.
Question is do I need to swap the inverter? Or will the 180s screen inverter work with the 180c LCD panel?
|
Posted by: haemogoblin on 2017-03-19 18:07:14
For some reason my iPad didn't include screen in the subject of this thread.
I'm trying to fit 180c colour panel inside a 180.
|
Posted by: techknight on 2017-03-19 18:10:15
no, there are differences on the CPU daughter board as well as everything else.
you need pretty much the whole display assembly with cable, the interconnect board, and the CPU board.
|
Posted by: haemogoblin on 2017-03-19 18:59:59
Thanks for that!
|
Posted by: danikayser84 on 2017-03-20 14:15:08
Also aren't the bezels for 165c/180c thicker and have a 4:3 cutout for the 640x480 screen (rather than 640x400)? That will be an issue there with putting a 180c screen inside a plain 180 😉
|
Posted by: techknight on 2017-03-20 14:36:59
thats why I said whole display assembly.
|
Posted by: haemogoblin on 2017-03-21 01:03:41
I can get my hands on the screen bezel. I was just wondering if the cables for the grey scale screen would work with the 180c colour panel.
|
Posted by: techknight on 2017-03-21 14:32:17
nope. different
|
Posted by: haemogoblin on 2017-03-25 09:06:06
Then it looks like trying it in the oven and maybe keeping my eyes open for a 180c
|
| 1 |