| Click here to select a new forum. |
| 1400c power on issue |
Posted by: Brooklyn on 2017-03-12 10:52:09
Hi, I have a 1400c that powered on using the reset switch in back when I first got it. Since then it will not power on at all.
I tried pulling the battery and AC adapter and holding the reset switch for 1 minute. I tried cutting the connection for the PRAM battery and letting it sit overnight. No luck. Only signs of life are the screen flashing and sound from speaker when i press the reset button when plugged in.
Are there any other tricks to get it started?
Thanks,
Jon
|
Posted by: Compgeke on 2017-03-12 14:15:14
First thing I'd check is to make sure there aren't any PCMCIA cards inserted. Some can cause issues with power I've found, no idea why. The second thing is try to turn it on without a battery inserted, I have a couple 1400 batteries that won't allow the system to start up with them installed.
|
Posted by: Brooklyn on 2017-03-12 15:51:22
Hi, no pcmcia cards, and I pulled the battery as well yesterday. It was an aftermarket battery, I'm sure it wasn't helping so I plan to recycle it.
|
Posted by: Trash80toHP_Mini on 2017-03-12 18:21:03
Strange one. Almost every time I plug the power adapter into mine it boots right up, maybe because of the dead PRAM bat? If it's finicky, sometimes I'll let it sit overnight and the next day it boots as normal when plugging in the hot AC adapter. Power strip cycling does the same thing.
YMMV
|
Posted by: butterburger on 2017-03-13 08:16:40
Keep in mind, PowerBooks 1400 need recapping. If you did not yet recap it, then expired capacitors might be the problem which you observe.
|
| 1 |