| Click here to select a new forum. |
| remove Apple logo from the case? |
Posted by: CharlieFrown on 2017-03-09 05:16:18
Hi, it might seem obvious to you, but I do not want to mess it while trying it for a first time.
I need to replace that frontal logo on the case of my Plus (colors are totally washed out), on some Internet photos this little apple logo seems like a badge which stick to the hole in the plastic. Will tiny flathead screwdriver do the trick or maybe ducktape method - stick and pull?
|
Posted by: bibilit on 2017-03-09 05:21:39
There is a hole in the front casing, just behind the Apple logo, pushing from the inside with a paper clip will pop the logo out.
|
Posted by: CharlieFrown on 2017-03-09 05:23:25
great! thanks bibilit..
|
Posted by: sstaylor on 2017-03-09 17:52:23
Carefully though! Apparently if you push too hard you can dimple the front of the logo.
|
Posted by: Trash80toHP_Mini on 2017-03-09 21:04:07
Yep, you can.
|
Posted by: unity on 2017-03-10 15:49:14
You can use something like a hairdryer to gently apply some heat before pushing it out. Softens the adhesive.
|
Posted by: CharlieFrown on 2017-03-21 06:59:55
Fortunately popped out smoothly! Had to remove the frame that holds the hard disk, but then it was a piece of cake.
Thank you guys.
|
| 1 |