| Click here to select a new forum. |
| Farallon EtherMac Problems |
Posted by: IlikeTech on 2017-02-19 10:30:16
Hello, I am trying to use a new EtherMac adapter to set up macipgw. I have tried the image, and on my Pi, but the link light just blinks irregularly, and the Ethernet status does not light. Can I have some help?
Thanks, IlikeTech
|
Posted by: mactjaap on 2017-02-19 15:17:12
Nice you test MacIPgw! But first get you on the LAN.
Can you connect to an old 10/100 hub or switch?No Ethernet light means no LAN connection.
Could be a modern switch problem.
|
Posted by: IlikeTech on 2017-02-20 08:58:17
Does the type of ethernet cable matter?
|
Posted by: IlikeTech on 2017-02-20 12:59:53
Well, it turns out I needed a crossover cable. I set my port to a 10mb half duplex, plugged in the cable, and BAM! It works! Now to set up MacIPGW.
|
Posted by: mactjaap on 2017-02-21 12:25:24
You can download MacIPgw Virtual Machine from my web site http://www.macip.net
Out of the box MacIP over LocalTalk.
|
Posted by: techknight on 2017-02-22 15:12:32
Do you still have to alter the routing tables? or did you fix that?
|
Posted by: mactjaap on 2017-02-22 15:16:42
Full nat now. So big YES! Just startup the VM and it will work.
|
| 1 |