| Click here to select a new forum. |
| SE/30's A/B - how much of it do you really need . . . |
Posted by: Trash80toHP_Mini on 2017-01-13 05:59:13
. . . in the case that you've removed the CRT and replaced it with a 10" Color VGA CRT?
|
Posted by: Trash80toHP_Mini on 2017-01-13 07:56:54
To be more specific, I'm talking about removing any components like the flyback and anything else that drives the stock CRT, but isn't necessary to run the MoBo.
|
Posted by: techknight on 2017-01-14 09:24:49
none of it. just have to re-wire the power supply into the LB harness.
|
Posted by: Trash80toHP_Mini on 2017-01-14 09:40:45
SWEET! That'll be easier and prettier if I depopulate the thing and use it as a "re-wire" circuit board. I thought there might be a BigAss load leveling capacitor, some kind of line cleaning component or some other kind of annoying schiznit on there that might be necessary/desirable to keep in place.
|
Posted by: CC_333 on 2017-01-14 13:30:07
In the 128/512/Classic/Classic II, yes. PSU and CRT circuitry are all intertwined, and separating them completely is very difficult I would think.
The SE and SE/30 have separate PSUs, however, so it would be trivial to isolate whatever wires serve the LB and cut off/reroute the rest.
How do you plan to get video out? A PDS video card?
c
|
Posted by: Trash80toHP_Mini on 2017-01-14 13:47:32
That'd be the fallback option.
|
| 1 |