| Click here to select a new forum. |
| RamDisk+ Crashing |
Posted by: IlikeTech on 2016-12-28 10:05:08
Hello, I am trying to load Mac OS 6 into ram using the RamDisk+, however it crashes with a coprocessor not installed error.
Why?
Thanks
|
Posted by: just.in.time on 2016-12-28 20:04:34
Does RamDisk+ require an FPU unit?
|
Posted by: rsolberg on 2016-12-28 22:08:13
If the Mac in question has a 68000 or 68020, perhaps the message is referring to a lack of PMMU.
|
Posted by: IlikeTech on 2016-12-29 05:16:04
It was running on a Macintosh Plus. I'm not sure why, but it got partly through Loading files before crashing.
|
Posted by: Scott Baret on 2016-12-29 16:58:14
Sounds like you may just have a corrupt copy of it. Try a fresh one.
I have used this on countless Pluses and other non-coprocessor Macs with no problem.
|
Posted by: IlikeTech on 2016-12-29 17:33:20
Um, I don't currently have a way to do that. I can't load a fresh copy because I got the disks from Reasons. I'll let you know when I can.
|
Posted by: just.in.time on 2016-12-29 17:46:04
How much RAM do you have installed in the Plus? If it is the stock 1mb, you may be a bit cramped for that space sharing between RAM and disk.
|
Posted by: IlikeTech on 2016-12-29 17:47:34
4mb of 3chip Simms at 7ns were installed.
|
Posted by: just.in.time on 2016-12-30 00:16:43
Oh good 🙂 you should have adequate space for both actual usage of the RAM as RAM, and some allocated as a disk.
|
Posted by: IlikeTech on 2016-12-30 04:48:35
Yea, my ram was shot, so I figured why not upgrade anyway.
|
| 1 |