| Click here to select a new forum. |
| Pimped Pismo (or Wallstreet) cover with aluminum sheet? |
Posted by: FacnyFreddy on 2016-12-14 21:11:08
My google-fu is weak.
I recall a pimped Wallstreet or Pismo where someone had taken self adhesive aluminum or metallic sheets and covered the sides of the cover (leaving a black "mohawk") down the middle.
Does anyone remember this? I was trying to think how they did it and what tools they used. I might try this on my other Pismo but wanted an idea of how they did it.
|
Posted by: unity on 2016-12-14 21:41:29
Are you sure you dont mean the opposite? And aluminum center? Because I have seen that. The center is already metal, so its just a matter of removing the coasting and maybe polishing it.
|
Posted by: galgot on 2016-12-14 23:28:04
this one ?
http://www.applefritter.com/?q=node/931
|
Posted by: FacnyFreddy on 2016-12-15 09:19:04
BINGO!!!
I didn't realize they actually removed the covering on the center section instead of adding self adhesive foil as I had thought.
I'm jealous they have a bookendz... I've been hunting for one now for some time. (I might have to dig out some connectors/cables and stuff and try and make one myself)
this one ?
http://www.applefritter.com/?q=node/931 |
Posted by: Unknown_K on 2016-12-15 17:28:11
Are all the port repliactors for the Wallstreets Bookendz brand, cause I have a port replicator I am not using.
|
Posted by: rsolberg on 2016-12-15 17:47:09
This mod only works on the Wallstreet. The Pismo and Lombard have entirely plastic outer cases, rather than the rubbery skin over aluminium design of the Wallstreet.
|
| 1 |