68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| Macintosh Color Display M1212 - Convergence Question | |
| Posted by: smrieck511 on 2026-06-27 11:20:41 Whenever I widen the horizontal adjust, the top and bottom corners move out but the middle of the left and right side stays where it is... like this: ) ( Is there an adjustment to counterbalance this and get them even? | |
| Posted by: Byrd on 2026-06-27 20:54:08 Hi smrieck, Yes, there is a dial to adjust this distortion, see service manual below, page 31. Before delving in, clean all the pots using electronic solvent spray and allow it to warm up for 20mins+ before adjustments are made. The Display Service Utility might also help you to know the recommended dimensions for the image so you're not overdriving it. Display Service Utility - Macintosh Garden•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••••••••••••••••••• READ ME FIRST •••••••••••••••••••••••••••• SUMMARY This file contains important information about this online posting of the Display Service Utility.
 | |
| 1 |