| Click here to select a new forum. |
| Powerbook 100 Battery |
Posted by: Frederick on 2026-05-11 08:46:12
I'm building a battery for my newly revived PB 100. The components I have picked are two Lithium pouch cells, a BMS board and a regulator module. I have designed and 3d printed a shell in ABS. My total cost will be approximately $45. After I have the battery completed I will post photos. |
Posted by: finkmac on 2026-05-11 08:55:00
LiPo/Li-ion or LiFePO4? |
Posted by: Frederick on 2026-05-11 09:03:00
LiPo/Li-ion or LiFePO4? 2 flat LiPo pouch cells in series with a 2S Li-ion/LiPo BMS, then regulate or limit the output as needed. |
Posted by: finkmac on 2026-05-11 09:50:37
aww, was hoping it was LiFePO4 like mine 🙁
but don't let me discourage you... that's pretty cool 😀
Looking forward to seeing how it turns out! |
| 1 |