68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| Turbo 040 won't fit in a Mac IIx? | |
| Posted by: ObeyDaleks on 2026-02-19 20:54:36 So here's a weird one. I finally found a Daystar IIx adapter (pretty elusive, that one). I attach a Turbo 040, open up the IIx, aaand... it won't fit!! The card is too tall, i.e. the post that holds up the drive tray is in the way. I need maybe extra 5-7mm. This seems odd since the Turbo 040 is designed to work in the IIx. I guess I could cut a notch in the plastic post, but I'm just refusing to believe that they made a mistake when designing the adapter. Anybody have any idea as to what's going on here? It fits fine in the Mac II because the adapter is angled and the card sits on top.  But in the IIx, the card is on the side. I can just BARELY fit a Powercache, but the Turbo is taller:  | |
| Posted by: nathall on 2026-02-19 21:28:28 Not an expert on these by any means, but from the following link it appears there are four revisions of the Turbo 040, and I can tell from the photos even without an external scale reference they are all slightly different dimensions: 
DayStar Turbo 040NuBus based 040 processor upgrade card compatible with numerous models including Macintosh SE/30, Macintosh II, Macintosh IIx, Macintosh IIcx, Macintosh IIci, Macintosh IIsi (with adapter), Macintosh IIvx, Macintosh IIvi.
wiki.preterhuman.net
You appear to have the one at the very bottom which seems to be the tallest. The one directly above it, where the board edge is flush with the top of the ‘040 looks like it would probably fit a IIx. | |
Posted by: ObeyDaleks on 2026-02-19 21:52:07Not an expert on these by any means, but from the following link it appears there are four revisions of the Turbo 040, and I can tell from the photos even without an external scale reference they are all slightly different dimensions: Good call! I actually have three but they are all the same (oldest?) version - the one with the extra cache card on the back. My version definitely looks taller in the pictures. I guess I knew there were multiple versions but I didn't realize they were different sizes. I actually thought maybe they made multiple versions of the adapter and I got the wrong one. This is a relief since the adapter is actually much harder to find. P.S. As a further confirmation, the manual that includes, among others, the IIx installation instructions, does have a picture of the newer version of the card. https://www.artmix.com/pdffiles/TurboIns_MN.pdf | |
| Posted by: Unknown_K on 2026-02-19 22:32:44 I put a Daystar 040 into a IIx and from what I remember it was a tight fit, but it has been a while. | |
| Posted by: eharmon on 2026-02-19 22:40:35 Agreed with the above. The later revisions are noticeably shorter and work in more machines. | |
| 1 |