68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | Mac SE: ?: Video board width adjustment | Posted by: Addicted on 2025-04-05 15:16:07
Hi all, dusting off an SE I recapped oh, three years ago. The video needed readjustment, and after correcting the height I noticed that the vertical height coil seems to have no screw tap in there. I can't tell for sure - does it accept a (plastic) Allen wrench instead? Or is the plastic screw-cap missing? | Posted by: ObeyDaleks on 2025-04-05 15:58:51
I believe you need a 2.4mm hex key for those. | Posted by: Addicted on 2025-04-05 17:59:58
Ah, thanks. As suspected. While I have a set of ceramic-shaft RF screwdrivers, I finally tossed my all-plastic CRT/TV tool pouch years ago. Now I need the hex tool it had, the one I never used. Time to improvise. Whittling down a cheap bamboo chopstick is Plan A 🙂 | | 1 |
|