68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| Performa 475 System Installer fault ... | |
| Posted by: franklyn on 2025-02-11 02:45:41 Macintosh Performa 475 with full 040 CPU and 128MB Ram and Mainboard set to 33Mhz CPU Clock and BlueSCSI I can not install a system 8, 7.6 or 7.5 from CD ROM or Floppy Image files, see the picture ...   | |
| Posted by: robin-fo on 2025-02-11 02:50:57 Is it possible that the Gestalt check fails because of the overclock? Try wish I were… | |
| Posted by: Garrett B on 2025-02-11 05:36:34 Yes it's the overclock causing trouble. You can use an emulator like Basilisk to install onto the disk image you're using. You could also revert back to stock 25MHz speed to do the install, then try the overclock again. Easiest thing would be to install from a modern computer, then reinsert the SD card back into the BlueSCSI. You'll be amazed at how fast an OS installs in Basilisk! | |
| Posted by: robin-fo on 2025-02-11 05:53:49 ..or revert the hardware overclock and use software overclocking | |
| Posted by: killvore on 2025-02-12 07:48:12 It might be possible to use WishIwere to spoof a different identity - I have never tried it myself, but it may be worth a shot before you do hardware mods? http://macintoshgarden.org/apps/wish-i-were-v20 | |
| Posted by: franklyn on 2025-02-15 09:46:40 Put the BlueSCSI Device on my Quadra700 also Overclock to 32Mhz and install the System from CD Rom and use it than with the Performa 475. | |
| Posted by: franklyn on 2025-02-15 09:59:10 " The Tool Wish I Were" do the work, the installer can now be started and work ... | |
Posted by: killvore on 2025-02-15 12:23:55" The Tool Wish I Were" do the work, the installer can now be started and work ...Ah, fantastic! That's great to have confirmed 😄 | |
| 1 |