68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.
Overclocking a Powerlogix Powerforce G3 in a Powerbase 180
Posted by: Zhinü on 2024-08-09 21:52:06 Does anyone happen to have the manuals for the PowerLogix PowerForce G3? I want to try overclocking it, but can’t find anything about the round hex switches on top.
Posted by: lolo799 on 2024-08-13 03:54:54 Found this: https://www.oocities.org/red_quadra/accelerator/pf_g3.html Or this: https://web.archive.org/web/20010305082002/http://www.powerlogix.com/support/freqchart.html The switch closer to the center of the cpu board is the bus speed switch, the outermost is for the bus ratio.
Posted by: Zhinü on 2024-08-15 13:32:32 Found this: https://www.oocities.org/red_quadra/accelerator/pf_g3.html Or this: https://web.archive.org/web/20010305082002/http://www.powerlogix.com/support/freqchart.html The switch closer to the center of the cpu board is the bus speed switch, the outermost is for the bus ratio. Thank you so much! Will have to mess with this later.
1