68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.
Pads Lifted During Ram Chip Reseating on LCIII
Posted by: redphantom on 2024-05-22 17:50:26
Howdy All.

Like the topic says, I had some pads that lifted when I was reseating U26 on an LCIII. I've attached a picture to show which chip I'm talking about. The traces are the ones at the bottom of the chip closet to the RAM slot. IMG_3873.jpgI can't quite see where the traces go for the two pads that have lifted, and I was hoping someone might be more familiar with the board layout and can point me to the right direction as to where I could run a wire off the pins of the RAM chips.
Posted by: chiptripper on 2024-05-29 12:04:25
For those two I believe you should be able to bodge to the same pins on the next chip over. Eg. pin 10 on U26 -> pin 10 on U27.
1