| Click here to select a new forum. |
| Setting IDE HDD as boot drive in 9600 |
Posted by: crazyben on 2024-05-15 09:11:35
I have Powermac 9600/300 with Sonnet G3 500mhz installed. It also has Sonnet IDE card and with voodoo2 3dfx video card. It is running 9.2 on IDE drive. When i connect any SCSI drive internally or externally it tries to boot from it rather than booting from IDE HDD. What do i need to do to so IDE is setup as boot drive when SCSI drives are connected? |
Posted by: finkmac on 2024-05-15 09:27:33
generally that's set in PRAM. do you have a good battery in there? |
Posted by: crazyben on 2024-05-15 09:44:03
I did install a brand new battery but it is not working for some reason. I am going to get another battery to rule out battery issue. |
| 1 |