68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.
Yet another Blue SCSI SE/30 bracket post…
Posted by: reallyrandy on 2024-05-10 15:25:53
I have an SE/30 that had been converted from an SE. I'm assuming the chassis was upgraded as well to accomodate a PDS card. Unfortunately, the part of the chassis that allows for a bracket to be attached aligning with the windowed opening on the back of the Mac is not there. I can't take the one off the SE because it's welded on and I can't just swap chassis because there is no opening in the SE chassis for PDS card.
Does a 3d printable file exist for this part? Or does anyone have one they don't need?
I'd like to mount a BlueSCSI in there so I can change the SD card if want to.
20240510_171749.jpg_1k.jpg



Here is a pic I found online of what I need
0175fd6d-e80d-41f1-9ed7-9bce3e8d7ed9_4032x3024.jpg_1k.jpg
Posted by: s_pupp on 2024-05-10 16:08:22
Thingiverse has one.
Posted by: reallyrandy on 2024-05-10 17:55:17
That's it, thanks!
1