| Click here to select a new forum. |
| PowerClip reproduction |
Posted by: VMSZealot on 2024-03-13 14:30:10
Does anyone know what the circuit diagram for the NewTechnology PowerClip is? Would there be any particular difficulty in creating one - I wouldn’t mind giving my Quadra a bit of pep, but I can’t find an original anywhere! |
Posted by: cy384 on 2024-03-14 09:16:24
It's basically an oscillator with a multiplier, the circuit is very simple. The tricky bit is the mechanical design for the clipping.
There are a few other approaches to overclocking Quadras, there are a number of threads here discussing it. Usually people will solder on a new oscillator, but some models will overclock with some jumpers/resistors. There's also the 'spicy o'clock' device which is functionally similar to the clips.
Which Quadra do you have? The 650/800 is one of the easiest to work with and most studied. |
Posted by: VMSZealot on 2024-03-14 09:21:31
I've got a Quadra 650, which has a full 040 at 33MHz. |
Posted by: cy384 on 2024-03-14 09:24:15
There's a new thread here and a longer one with a variety of experimentation here. |
Posted by: eharmon on 2024-03-14 20:09:16
You can duplicate it with a test clip and a fixed or variable oscillator, if you don't want to do any soldering. I have an example of how to do it with the spicy-o-clock, which gives you better tuning than the New Tech, here: https://eharmon.net/retro/macintosh/spicy-o-clip/
If you just want to hit 40 and are willing to solder, I think Phipli's new method is probably best! |
Posted by: VMSZealot on 2024-03-15 01:13:33
Excellent advice everyone. I'll give it a bash! |
| 1 |