68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| My take on the Quadra 950 PSU | |
| Posted by: Joe_Goes on 2024-02-25 11:47:49 After a year or so with on and off research I was finally able to bring my precious Quadra 950 back to life. Thank you Geekdot | |
| Posted by: imactheknife on 2024-02-27 18:25:03 Sweet🙂 good job | |
| Posted by: ArmorAlley on 2024-02-29 03:59:19 Well done! They are noisy beasts, and, of late, prone to failure. After only 30 years too. @BadGoldEagle also did good work with the PSU of his Q950. BGE's take on the Quadra 900/950 ATX PSU ModLadies and Gentlemen, Today, I would like to talk about the rapidly decreasing population of working Quadra 9x0 (900 and 950) specimens. If no action is taken within the next 5 or 10 years, the entire specie will soon disappear. Although the exact cause of death is still unknown, most...
68kmla.org
| |
| Posted by: joshc on 2024-02-29 04:58:26 I rebuilt mine based on geekdot’s guide. @Durosity now has it, hopefully my handy work is holding up. | |
Posted by: Durosity on 2024-02-29 11:59:29@Durosity now has it, hopefully my handy work is holding up.Sure is! It’s one of my favourites in my collection! | |
| Posted by: Joe_Goes on 2024-03-01 14:45:21 slowly but surely… Decided to “upgrade” the fan to a Noctua NF-F12 IndustrialPPC-2000. Original fan drew 0.52amps, replacement power supply fan draws 0.30 and the noctua says it draws 0.1amp. | |
| Posted by: Joe_Goes on 2024-03-02 12:27:13 She’s up and running lads! Next up… clean up the peripheral board, wire up with wago connectors. Fan a bit loud, going to see if I can wire up a fan controller. | |
| 1 |