68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | CRT Screw Dimensions? | Posted by: Kouzui on 2024-02-18 16:43:15
Does anyone know what the thread pitch for one of the crt screws is? I picked up an SE/30 recently that, turns out, is missing one of the screws holding the CRT in. I can get the other dimensions from the other screws but I don't have anything precise enough to get the pitch. Basically, my plan is to just go to Home Depot and pick up a screw with the same measurements and stick it in there. | Posted by: zigzagjoe on 2024-02-18 16:52:46
It's a #8 screw, half inch should do it. | Posted by: Kouzui on 2024-02-18 16:59:23
It's a #8 screw, half inch should do it. Thanks! | | 1 |
|