| Click here to select a new forum. |
| IIvi dead even after recap. |
Posted by: crazyben on 2024-02-15 22:10:00
I recapped the IIvi and when I turn on the power nothing happens. I did test with knowing working PSU one from q700. Any ideas on what I need to check. |
Posted by: JC8080 on 2024-02-16 07:26:53
Was the board working before the recap? Have you checked for proper voltages at the floppy port? |
Posted by: crazyben on 2024-02-16 07:29:56
No it was dead before the recap. i haven't checked the voltage. How much should it read? |
Posted by: joshc on 2024-02-16 07:30:32
C21 leaks into the Egret which will cause startup issues. A thorough cleaning of the Egret chip can help. |
Posted by: crazyben on 2024-02-16 08:58:01
C21 leaks into the Egret which will cause startup issues. A thorough cleaning of the Egret chip can help. i removed the Egret chip and cleaned it no change. |
Posted by: MrFahrenheit on 2024-02-16 09:17:26
Did you remove PRAM battery and let it sit for a few hours before reinstalling a fresh good battery? |
Posted by: crazyben on 2024-02-16 09:23:48
Yup i did that. But not after Egret chip clean up. |
| 1 |