68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.
Replacement Coloured Apple SE Front Panel Logo
Posted by: Benno on 2024-02-14 00:44:35
Is there anywhere to buy a front Macintosh Apple Logo, even a sticker would suffice, the metal part is still there but lost half the bottom in a clean.

Cheers

Ben
Posted by: slomacuser on 2024-02-14 01:04:09
I have
Posted by: Benno on 2024-02-14 01:14:47
Wow, yes please! Do you have one for sale ?
Posted by: zefrenchtoon on 2024-02-14 03:56:14
I have
Even NeXT ones !!?? 🀩
Posted by: slomacuser on 2024-02-15 08:07:18
πŸ™‚

IMG_8498.jpeg
Posted by: robin-fo on 2024-02-15 08:11:28
Is this IIvx badge also for sale?
Posted by: slomacuser on 2024-02-15 08:29:41
Yes
Posted by: zefrenchtoon on 2024-02-16 08:12:01
πŸ™‚

View attachment 69770
That mouse pad !! 😍 🀩
Posted by: crazyben on 2024-02-16 09:00:11
Yes
Do you know how i can remove the iivx and q650 badge i need to swap them.
Posted by: joshc on 2024-02-16 11:41:11
Do you know how i can remove the iivx and q650 badge i need to swap them.
A straightened paper clip from the back of the bezel does it from memory - there's a pinhole in the back of where the badge goes
Posted by: crazyben on 2024-02-16 12:37:17
It is in there pretty tight. I tried pushing but it won’t budge.
Posted by: joshc on 2024-02-16 12:53:13
Yeah, it takes some force on these. They are glued on.

I might have wacked a screwdriver with a hammer to get them out before, can't remember. It was probably something with a bit more force than anything a paper clip could do. πŸ˜€
Posted by: crazyben on 2024-02-16 12:54:40
Yeah, it takes some force on these. They are glued on.

I might have wacked a screwdriver with a hammer to get them out before, can't remember. It was probably something with a bit more force than anything a paper clip could do. πŸ˜€
Hahaha. I am scared that I might break it with too much force.
1