| Click here to select a new forum. |
| Radius Thunder pci |
Posted by: pupuklok on 2023-10-01 15:18:30
Hello . I have a old radius thunder 1600 pci version videocard found and i put it in a powermac g3 bue and white as a second videocard.
The card worked so far i see the radius logo . But i can not find drivers for mac os 9. There are only old drivers for a older mac os.
Can i use this card on this powermac?
Or must i flash the rom of this card to work on the powermac g3 blue and white ?
The card works well but only lower resolutions i can choose from and of course the card does not have any 3d rendering for games . only 2d games works. |
Posted by: Phipli on 2023-10-01 15:25:12
Hello . I have a old radius thunder 1600 pci version videocard found and i put it in a powermac g3 bue and white as a second videocard.
The card worked so far i see the radius logo . But i can not find drivers for mac os 9. There are only old drivers for a older mac os.
Can i use this card on this powermac?
Or must i flash the rom of this card to work on the powermac g3 blue and white ?
The card works well but only lower resolutions i can choose from and of course the card does not have any 3d rendering for games . only 2d games works. I think my Radius card didn't like running in Mac OS 9. Trying to think what driver versions I have about. I didn't have the same card as you, I had the more budget PCI PrecisionColor |
Posted by: Phipli on 2023-10-01 15:29:49
Is it one of these? If I remember, I think version 3.3 is actually mislabeled (it is a driver for Nubus cards), but if you check all of them, something should work with your card... But probably not in the B&W. |
Posted by: Powerbase on 2023-10-01 16:08:32
Is it the ThunderPower version of the Thunder card. It had the solder pads but no connector for the optional DSP board.
I used it for a bit in my 0S 9.1 Powerbase for a while. It worked fine but had a sync on green problem. I think I used the Radiusware drivers. |
| 1 |