| Click here to select a new forum. |
| Star Trek After Dark Does Not Work - Mac OS 8.1 |
Posted by: Concorde1993 on 2023-08-09 08:43:18
Tried installing my original boxed copy of Star Trek - TOS After Dark on my IIfx running OS 8.1.
The installation itself went fine. However, the control panel for After Dark doesn't seem to do anything (can't switch it on or off/can't program the screensaver to activate at a desired time/can't run any demos of the screensavers including the default Starry Night).
This software works perfectly in System 6 and 7.1. Is it too old to work properly in OS 8.1? It's from 1992. |
Posted by: shadedream on 2023-08-09 08:54:35
You may need to install it with a newer version of the Afterdark software. I have it running on one of my systems in 8.1 as part of an Afterdark 4.0 install currently. |
Posted by: Forrest on 2023-08-09 09:59:40
I disagree with shadedream. I have After Dark 4 and it does not work with MacOS8 or 8.1 on 68K based Macs.
I suggest reverting to System 7.6.1 - the latest OS compatible with After Dark. Star Trek TOS After Dark installs and work fine with After Dark 4. |
Posted by: LaPorta on 2023-08-09 10:54:54
I have After Dark 3 or 4 (I forget which) working on 8.6 fine on my PTPro. I regularly run ST:TNG on there…granted that’s from a later date, but After Dark itself should work just fine. I can check the version when I get home. |
Posted by: Concorde1993 on 2023-08-09 12:27:37
Yeah I think the TNG one is from '94. I don't have that one, but I doubt it should make much of a difference.
I also have the Disney release from '93.
Were there any other screensaver programs for 8.1? |
Posted by: LaPorta on 2023-08-09 18:00:04
AfterDark 4.03 works fine on 8.6, that’s what’s on my machine. |
Posted by: shadedream on 2023-08-09 19:18:19
I disagree with shadedream. I have After Dark 4 and it does not work with MacOS8 or 8.1 on 68K based Macs.
I suggest reverting to System 7.6.1 - the latest OS compatible with After Dark. Star Trek TOS After Dark installs and work fine with After Dark 4.
Hmm I guess 4 could have issues with 68k? but that would seem to odd to me. I'm running 4 via 8.1 on my Quadra 700 with a 601 card. |
Posted by: Concorde1993 on 2023-08-09 20:24:43
According to the Macintosh Repository, After Dark 4.0 requires a 68040 or PowerPC to run.
Not sure about Version 3.0 |
Posted by: Forrest on 2023-08-09 21:02:15
Hmm - I was using After Dark 4 on a 68040 Mac. |
Posted by: shadedream on 2023-08-10 13:25:02
Afterdark 3 only requires a 68020, so it should work fine assuming it works in 8. I haven't tried it as I don't typically install 8 on anything below an 040 or early PPC system. |
| 1 |