68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| IIci : Specification of the floppy/HD cage machine screw? | |
| Posted by: Stephen_Usher on 2023-06-22 11:21:31 Does anyone have the specification (thread/length) of the screw which holds the floppy/hard drive cage onto the base of the case in the IIci? It's missing from the machine I have and would like to find a replacement. | |
| Posted by: volvo242gt on 2023-06-22 14:05:13 Sent a PM... -J | |
| Posted by: Stephen_Usher on 2023-06-22 14:27:34 Thanks, but shipping a single screw across the Atlantic would be prohibitively costly. 🙂 If I knew the thread size and pitch and the length I should be able to easy get one in the UK. | |
| Posted by: Fizzbinn on 2023-06-22 14:29:55 M3.5 x 12mm This is what I bought a while back: 
M3.5 Phillips Pan Head Machine screws, A2 Stainless Steel DIN 7985A Coarse ThreadStainless Steel Metric M3.5 screws with machine threads for use with a nut or in a tapped hole. Also referred to as a stove bolt. Pan heads are slightly rounded with short vertical sides. Phillips drive is x-shaped for installation with a phillips screwdriver.
monsterbolts.com
| |
| Posted by: Stephen_Usher on 2023-06-23 12:42:39 Thanks. | |
| 1 |