68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | Help with fly back anode cap | Posted by: mloret on 2023-06-16 04:06:48
Hey guys,
I have a flyback on an analog board with a cap that’s no good. The little prongs that go in the CRT have been damaged but they don’t seem to be removable. I think I have to replace the entire cap. Is it possible to replace the cap and wire?
Please let me know if you can provide some guidance, I have never done this before. | Posted by: chiptripper on 2023-06-18 10:33:37
Some flybacks you can either remove the prongs with a little nut, or there’s a bit of solder holding it together. Tricky to desolder because it’s right inside the cap between the prongs. | | 1 |
|