68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| Mac SE boots to black screen | |
| Posted by: macsonny on 2023-06-04 20:53:38 Hi All, I have a Mac SE that both the motherboard and analog board have been recapped. The machine powers on and I get the familiar boing. Fans spin up but screen remains blank. Is this just likely a replacement of the two 470k ohm resistors R22 and R25? Thanks Sonny | |
| Posted by: Juror22 on 2023-06-04 21:34:19 Are you sure that you have fully plugged in all the connectors? I know this is a basic step on re-assembly, but if you do enough of these, sometimes you notice the CRT board connectors might not be fully engaged after reassembly. | |
| Posted by: macsonny on 2023-06-05 03:45:59 Ok, some good news and some bad news. I checked all the joints and reflowed a few. Now get a nice boing boot sound but I get thin bright horizontal line across the scree which is a step up from the blank screen I guess. I've tried reflowing the P1 connector and also replaced the TDA1170N IC (that's a fun job) but same result with the bright horizontal line. Any other suggestions?  | |
| Posted by: ObeyDaleks on 2023-06-05 04:35:25 Looks like you lost your vertical deflection. This could be an easy fix, or might require some troubleshooting of the analog board. The first thing I would check is the solder joints on the back of neck board, especially the ones that connect to the CRT pins. I would also check the neck board connector joints on the back of the analog board. All of those are prone to cracking and coming loose. | |
Posted by: macsonny on 2023-06-05 04:57:24Looks like you lost your vertical deflection. This could be an easy fix, or might require some troubleshooting of the analog board. The first thing I would check is the solder joints on the back of neck board, especially the ones that connect to the CRT pins. I would also check the neck board connector joints on the back of the analog board. All of those are prone to cracking and coming loose.I'll give that a go tomorrow and report back. | |
| Posted by: pezter22 on 2023-06-05 16:33:43 I just went through with the same issue on my MacSE FDHD recently. I recapped the analog board and replaced the same IC and the line remained. I ended up recapping the power supply I finally got a full regular screen. A few weeks later I got a checkerboard screen which was a motherboard issue. I ended up buying a replacement board on eBay. So I am happy the SE is functional again. | |
| Posted by: macsonny on 2023-06-06 01:05:20 Did a reflow of suggested pins on analog board and also neck board. I have now noticed an odd re-boot sequence - wondering if the power supply is failing? See attached video. View attachment IMG_2860.mov | |
| Posted by: macsonny on 2023-06-06 02:26:26 More progrès.. Changed out power supply and unit now starts up fine (no fluctuations) but sill horizontal white line. Any new suggestions? | |
| Posted by: macsonny on 2023-06-08 04:31:43 Bump | |
| Posted by: pezter22 on 2023-06-08 17:49:18 I also replaced the video board on my troubled SE. Maybe that may help. It's not very costly to check. 
VINTAGE APPLE MACINTOSH SE COMPUTER VIDEO BOARD, 820-0207-C | eBayFind many great new & used options and get the best deals for VINTAGE APPLE MACINTOSH SE COMPUTER VIDEO BOARD, 820-0207-C at the best online prices at eBay! Free shipping for many products!
www.ebay.com
| |
| 1 |