| Click here to select a new forum. |
| Classic II analog board on a Classic? |
Posted by: Jaek_3 on 2016-06-20 18:01:57
From what I can see, the analog boards for both the Classic II and the Classic are identical except for the CRT yoke connector. Would it be possible to solder the Classic's screen connector to the plug on the board?
|
Posted by: 360alaska on 2016-06-20 20:03:10
Why not just transfer the yoke over?
|
Posted by: Jaek_3 on 2016-06-20 20:16:46
Why not just transfer the yoke over? That could work I suppose. Are the two yokes wired the same?
|
Posted by: bibilit on 2016-06-20 22:35:00
Yes will work, no problem.
|
| 1 |