68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | | SE Take apart question | Posted by: greystash on 2023-04-07 18:26:31
I noticed that this ground(?) wire is almost completely loose after disassembling my SE. Can I touch/tighten this without having to discharge the CRT? It connects to the CRT neck board. | Posted by: Nixontheknight on 2023-04-07 18:32:46
I noticed that this ground(?) wire is almost completely loose after disassembling my SE. Can I touch/tighten this without having to discharge the CRT? It connects to the CRT neck board. yes, that is ground, but still be careful around high voltage, try not to touch the neck board or analog board while touching that wire, because it can hurt or be lethal in some cases | Posted by: greystash on 2023-04-07 18:34:30
yes, that is ground, but still be careful around high voltage, try not to touch the neck board or analog board while touching that wire, because it can hurt or be lethal in some cases Thank you @Nixontheknight! | | 1 |
|