68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| Mac II - broken RAM simm clips | |
| Posted by: egrath on 2022-12-19 21:13:47 Hi, as most of clips which holds the 30-pin SIMMs in place brake off by just looking at them, this has also happened to the previous owner of the Mac II logic board i'm currently working on. Has anyone a good working fix on how to secure the SIMMs in place when these tiny nibbles broke away? I found a 3D printed solution but don't know if they fit the II sockets as the guy who made it did this for his SE/30: 
Macintosh RAM Clips by PotatoFi | Download free STL model | Printables.comThese clips secure a 30-pin RAM SIMM to a broken plastic SIMM slot on retro Macintoshes. | Download free 3D printable STL models
www.printables.com
 Before i print them out, anyone already used these on a II? Best regards, Egon | |
Posted by: joshc on 2022-12-19 22:21:42Has anyone a good working fix on how to secure the SIMMs in place when these tiny nibbles broke away?In the past I've used hot glue - not ideal but at least it can be somewhat easily removed if needed and it is strong enough to hold the SIMMs in place. | |
| Posted by: egrath on 2022-12-21 10:52:22 Hi Josh, thanks for your reply, using Hotglue was also my first idea - did that and it worked flawless. Also tried the 3D printed brackets from PotatoFi and just would like to let the community know that they also work on a Mac II without any issues, in case anyone needs them too: 
Macintosh RAM Clips by PotatoFi | Download free STL model | Printables.comThese clips secure a 30-pin RAM SIMM to a broken plastic SIMM slot on retro Macintoshes. | Download free 3D printable STL models
www.printables.com
Best regards, Egon | |
| 1 |