68kMLA Classic Interface
This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.
| Click here to select a new forum. | |
| Question | |
| Posted by: MacTopus29 on 2022-08-21 18:19:53 I got error 040001 on a mac 128k. I know why this happened but do I need to solder to fix it? | |
| Posted by: Byrd on 2022-08-21 21:00:52 Yes, usually "bit rot" occurs in older RAM modules found on 128K chips; you will likely need to desolder all chips and put new ones in sockets. I wouldn't recommend just doing one and leaving the rest as chances are more will fail quickly. | |
| Posted by: Iesca on 2022-08-21 22:24:13 Socketing the RAM as Byrd says is highly recommended. Should any fail in the future, even if you don't replace all of them now, it will be much simpler to fix since you won't need to do any soldering later on. | |
| Posted by: MacTopus29 on 2022-08-22 07:16:28 ok thanks | |
| Posted by: bibilit on 2022-08-22 08:30:49 not the same post ? ErrorSo I found a mac 128k that im thinking on getting but it has an error code 040001. Anyone know how to fix that? Just trying to know how to fix before getting it.
68kmla.org
| |
| 1 |