| Click here to select a new forum. |
| Need help designing a PCB/Recreating one. |
Posted by: jajan547 on 2021-12-07 16:18:32
Hello everyone I am trying to replicate a ROM PCB I have all of the chips and even the socket needed for the ROM chip, however I have no experience with designing a PCB and really need help from someone with more experience or if someone is willing to design or replicate it for me I would be more than grateful. |
Posted by: trag on 2021-12-07 20:54:06
Hello everyone I am trying to replicate a ROM PCB I have all of the chips and even the socket needed for the ROM chip, however I have no experience with designing a PCB and really need help from someone with more experience or if someone is willing to design or replicate it for me I would be more than grateful.
Which machine does the ROM go with?
A number of ROM modules have already been designed, so the work may already be done. |
Posted by: 360alaska on 2021-12-07 22:05:03
PM Me |
Posted by: jajan547 on 2022-02-12 21:15:26
Which machine does the ROM go with?
A number of ROM modules have already been designed, so the work may already be done. It's for an Apple TechStep |
Posted by: trag on 2022-02-14 12:16:09
Hopefully you're getting help from @360alaska but in any case you might throw a scan of both sides of the ROM up here. That way we can see if it looks like any of the ROM modules that are already designed. |
Posted by: 360alaska on 2022-02-14 14:05:11
I told home that basically one will have to be disassembled, then I can make a schematic and then a pcb. |
| 1 |