| Click here to select a new forum. |
| Mac Mach |
Posted by: al kossow on 2021-11-16 16:55:57
have fun.. |
Posted by: LarBob on 2021-11-16 18:33:48
This is awesome to see finally out! From a cursory look inside, the necessary control panel to boot seems to be located in /src/boot/Mac2 in Mach.Hqx. I'm not near any compatible Macs right now, but it'd be awesome to see someone try this out! |
Posted by: LaPorta on 2021-11-16 18:35:42
If I knew what this was... |
Posted by: LarBob on 2021-11-16 20:32:43
From https://www-ftp.lip6.fr/pub/mach/cmu/FAQ/obsolete/MacMach.FAQ:
B) What Macintosh's run MacMach?
II, IIx, IIci, IIfx, SE/30, ClassicII
at least 8MB ram, at least 80MB disk (300MB for full+sources) Looks like I need to get my SE/30 up again. |
Posted by: cheesestraws on 2021-11-17 02:37:39
oh no, another rabbit hole to fall down... |
Posted by: ScutBoy on 2021-11-17 06:50:49
This might be dangerous, in a good way! 🙂 |
Posted by: cheesestraws on 2021-11-18 07:33:14
From a cursory look inside, the necessary control panel to boot seems to be located in /src/boot/Mac2 in Mach.Hqx.
Which tarball is this in? |
Posted by: LarBob on 2021-11-18 16:02:21
Which tarball is this in? I was looking at 6.92. It's in /usr (usr.tar.Z), so the full path would be /usr/src/boot/Mac2. That's a mistake in my post above, whoops. |
| 1 |