68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.

Swapping Monitors On A LC 575

Posted by: Guybrush3pwood on 2016-04-07 12:30:47 Ok, here's where I am. What's the easiest way to swap one monitor for another? Seems almost impossible considering the monitor is attached to a board that doesn't look like it will just slide out. Anyone have instructions for such a swap?

Posted by: omidimo on 2016-04-07 13:04:06 The info you seek is here, unless you already have gone thru it: http://tim.id.au/laptops/apple/legacy/lc_520.550.575.pdf This is also a great write up of the experience: http://appletothecore.me/files/mac_tv_restoration.php

Posted by: MinerAl on 2016-04-07 15:41:52 If you want to swap just the CRT (tube) you need to: unscrew the Torx-bolts at each corner (T-15? T-20? I can't remember, sorry), get the anode (the thing under the "suction cup" at the end of the thick red wire) disconnected... make every effort not to kill yourself with this step (search for details) gently pull the board straight back off of the neck of the tube Repeat for the other tube, swap, reverse the procedure. If you want to swap the whole video system, you only need to get the corner bolts and slide the video board straight back out.  You can leave the neck board and the anode attached to the CRT. It would probably be easier to just swap the logic boards at that point though 🙂 Be super careful with the CRTs themselves.  They're heavy and their necks are fragile.  Once you let the genie out it'll never show video again. 🙂

Posted by: Guybrush3pwood on 2016-04-07 15:59:41 Thanks guys! I was actually able to do it on my own by moving the board and monitor at the exact same time very, very carefully. It worked!

1