| Click here to select a new forum. |
| (Plus/128/512k) Centering image on CRT |
Posted by: cheesestraws on 2021-08-28 08:44:35
I have a Plus analogue board here that's producing an image that's too wide. If I adjust the variable inductor to bring the width to about the right place, it is right but the screen is offset to the left. I can't find an offset adjustment on these ABs: what can I adjust, if anything? |
Posted by: cheesestraws on 2021-08-28 08:56:21
Hm, on thinking about this, is this actually an LB issue, that the timing between hsync and the start of the line is off somehow? |
Posted by: Nixontheknight on 2021-08-28 09:04:42
You should be able to adjust the centering of the image using the centering rings on the deflection yoke, and there might be vertical and horizontal adjustment on the analog board |
Posted by: cheesestraws on 2021-08-28 09:29:16
How on earth did I forget that the centering rings on the yoke were a thing? Fixed now, ta! |
Posted by: Nixontheknight on 2021-08-28 09:37:51
How on earth did I forget that the centering rings on the yoke were a thing? Fixed now, ta! Yw. Have fun with that Macintosh |
| 1 |