68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.

Network card hardware error...

Posted by: cannfoddr on 2021-02-04 06:14:48 Just fired up my recapped SE/30 and put the network card back in.  I found some diagnostics on the HD and fired these up and am getting an address error from the Hardware diagnostics.  Card is using the dynaport driver but its a Shiva Access-T  The drivers seem to load and the led flashes.  I've cabled it up to a cat 5 connection and the light goes solid so I think its working! Unfortunately the disk image I am booting from does not have TCP loaded so I am going to wait until the BMOW ROM is installed and RASCSI is working to build a new image with TCP and do some further testing.

1