| Click here to select a new forum. |
| SE/30 MacCon PDS card not detected |
Posted by: PacNPal on 2021-01-11 17:56:24
I have been fighting with this for hours and decided to finally just make a post and see if anyone has ideas. I recently acquired a MacCon SE/30 ethernet card. Upon installing it in my SE/30, the EtherTalk installer does not recognize it as an option. The MacCon's green light is steady on when the SE/30 is powered on. I've tried reinstalling System 7 and re-seating the card a few times with no resolution in sight.
|
Posted by: nottomhanks on 2021-01-11 19:29:09
Have you installed the Asante software for more troubleshooting perhaps?
|
Posted by: PacNPal on 2021-01-12 04:44:29
Have you installed the Asante software for more troubleshooting perhaps? I have run the Troubleshooter and tried different versions of the software with none working. They all say they can't detect the card.
|
Posted by: Bolle on 2021-01-12 05:30:51
Does the card show up at all in TattleTech oder SlotInfo? That's the first thing you should check.
|
| 1 |