| Click here to select a new forum. |
| SE/30 Reset/Programer Bottons |
Posted by: History_SE30_Dude on 2020-10-17 03:47:39
I think the rest button on my SE/30 may have gone bad. Does anyone know a part number for it if I end up having to solace it? I hope a solder joint has just come loose.
|
Posted by: maceffects on 2020-10-17 05:22:02
Are you sure the plastic tabs going from the outer button button didn't break? That would be more common. However, if you do have bad buttons on the logic board I don't know that you'll find one sold seperatly and I don't think its a common button. However, rest assured knowing there are tons of these boards that suffered battery damage with these parts still being good 🙂
|
Posted by: bibilit on 2020-10-17 07:29:20
The button itself is pretty easy to find.
Never had any issue with it previously in any board I worked with.
The item itself is the kind of switch you will find in any accessory of that era, and still made today.
Used one lately :
|
Posted by: History_SE30_Dude on 2020-10-17 23:45:00
Thanks for the suggestions. I pulled out the plastic arms and discovered it had actually worked its way out just enough as to not engage the switch. I should remember by now to check the simplest possibilities first.
|
Posted by: aeberbach on 2020-10-18 02:29:03
I wish I could find one of these units. I have 3d-printed a couple of different versions but it's not the same.
|
| 1 |