68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.
INTEREST IN SCSI2SD MOUNTS?
Posted by: Rjp663 on 2020-10-08 07:42:04
I've designed a 3D printed SCSI2SD hard drive mount. It's different from other 3D printed mounts in that is utilizes threaded inserts for securing the PCB and attaching to the Mac chassis.  I've included several pics of the mount installed in my Classic II.

I could produce and ship them for about $20.  Any interest?  They really work well and look great!

Rick

IMG_0488.jpeg

IMG_0490.jpeg

IMG_0487.jpeg
Posted by: traildog64 on 2020-10-08 12:07:16
Hello, I have a Mac SE with SCSI2SD (version 5, I think). The 3D printed mount I have is seated so far back, that the LED cable keeps pulling out. How does the cable reach with this set up?

Thanks,

Rick
Posted by: Rjp663 on 2020-10-08 19:07:56
Rick,

thanks for the interest. I don’t have an SE to test on, so I don’t know. I’ll look for some pictures on the web to see if it’s a viable solution.

thank you

Rick
1