| Click here to select a new forum. |
| Seagate SCSI HD help needed |
Posted by: D@llas on 2020-09-19 00:06:55
I picked up a Seagate ST32151N 2.1GB 50pin SCSI hard drive. Im hoping to put it in my Performa 550. Problem is...I don't know much about SCSI.
http://office.manualsonline.com/manuals/mfg/seagate/st32151nwwc.html
It does not show up as an option during OS install or under any Apple disk utility or SCSI setup. I've tried playing around with the different jumper setting/termination settings.
Does this hard drive even work in this computer? Any help on the what the correct jumper settings should be for a performa 550?
Thanks
|
Posted by: D@llas on 2020-09-20 00:18:40
Update: I may have figured this out with the help of the patched Apple HD SC app. It is initializing now...
|
Posted by: micheledipaola on 2020-09-21 04:12:39
Jumpers will set the scsi id (maybe you want to make the boot disk show up as id0).
Also Systems before 7.3 (if I remember correctly) will not handle 2+ Gb without partitions.
|
| 1 |