68kMLA Classic Interface

This is a version of the 68kMLA forums for viewing on your favorite old mac. Visitors on modern platforms may prefer the main site.

Click here to select a new forum.
SCSI2SD PowerBook adaptor 3D model
Posted by: likanen on 2020-07-13 00:44:56
Does someone have a 3D model for scsi2sd PowerBook edition adapter to 2.5” frame?
Posted by: sutekh on 2020-07-13 03:20:58
Perhaps not helpful, but I was about to draw one up and print it when recently faced with a similar question and instead just re-purposed the original drive's mounting brackets. Per the attached pic, after bending the tabs 90deg, the existing holes in the PowerBook version of SCSI2SD align perfectly (in my Duo at least).
 

IMG_20200712_004736_1.jpg
Posted by: Crutch on 2020-07-13 03:56:22
Agreed. The original drive mounting bracket works great in a Blackbird as well. 
Posted by: likanen on 2020-07-13 06:36:12
Ok, I think for PB100 one needs to use SSD adapter as the native adapter (or two side clips) are side mounted.
1