| Click here to select a new forum. |
| SCSI2SD PB Edition and PB 5xx - dumb question |
Posted by: JRL on 2020-06-29 16:48:49
So I was getting ready to set up my SCSI2SD with my 540c, only to realize that the 540c's HD cable is keyed in a certain way so that nothing can go in pin 17 and the SCSI2SD is not (it doesn't have the missing pin 17 that the CF PowerMonster and other SCSI drives have)
For those using SCSI2SDs with their 5xxs, am I right in assuming that I have to break off pin 17 of the SCSI2SD?
|
Posted by: cruff on 2020-06-29 20:40:43
Does the cable have a solid fill for pin 17 or does it have one of those removable plastic filler pins? If it is solid, then you will have to break off pin 17. If the other case, then you can remove that filler pin, but be careful to plug the cable in with the correct orientation.
|
Posted by: Byrd on 2020-06-29 21:37:28
Bend it back and out of the way (insulate it) - test it out before clipping it.
|
Posted by: superjer2000 on 2020-06-29 22:00:53
Following as I have a 2x PB SCSI2SDs arriving shortly and one of them is destined for a PB 520c
|
Posted by: Franklinstein on 2020-07-02 11:48:25
On cables without a visible filler pin, I've been able to just push the pin through it since the plastic is pretty thin. You have to be sure you're pressing straight on though or you may bend something.
|
| 1 |