Posted by: MegaImg on 2020-04-28 08:59:31I am recapping a Mac SE/30 Analog Board rev C.. the question is on the 100uf cap...the schematics on the net, put this 100uf at 16v...but my board has 25v and must of the people out there...what is the right info?
Posted by: pj931 on 2020-04-28 09:19:24I’d go with the 25v to be safe. Putting a higher voltage than required doesn’t hurt anything, it just means the capacitor will continue to work at that higher voltage.
Posted by: MegaImg on 2020-04-28 09:33:15Ok, so it must work with the 16v...the original cap was 25v, but I order base on the schematics...the schematics show 16v