| Click here to select a new forum. |
| Apple DOS Compatibility Card |
Posted by: mhoney on 2020-03-14 17:05:59
I have a Performa 640CD with the 486/66 DOS Compatibility card but have no documentation. Would any of you know where I might find a PDF of the manual? Having trouble figuring out some of the key combinations.
|
Posted by: beachycove on 2020-03-14 17:51:47
This it?
https://web.archive.org/web/20150611065741/http://download.info.apple.com/Apple_Support_Area/Manuals/desktops/0307149AMPERF640UG.pdf
A good place to start for such things these days is the excellent website https://vintageapple.org
|
Posted by: mhoney on 2020-03-14 18:07:21
Thank you very much beachycove, that is exactly what I was looking for!
|
Posted by: mhoney on 2020-03-17 15:23:46
I'm in need of a little more help... I have tcp/ip networking very close to working in Windows for Workgroups 3.11 (Using the DOS Compatibility card) using the macndis driver from the PC Setup 1.6.4 but am stuck. I can successfully get an IP address, default route and dns from my DHCP server, and can ping the local address I get from DHCP but can't ping anywhere else on the LAN, not even the default gateway which is my router. I have TCP/IP turned off on the Mac side using administration mode of the TCP/IP control panel applet (Open Transport 1.1.2) so I don't think the Mac is getting in the way of networking. In fact, until I turned that off I couldn't get an IP from DHCP.
Anyone have any tips? This is a System 7.5.3 setup btw.
** fixed - not sure yet how I fixed it, but if I figure out what exactly I changed to get it working I will edit this.
|
| 1 |