| Click here to select a new forum. |
| Will the Macintosh Plus M0110A keyboard work on a Mac128K? |
Posted by: giolicious on 2019-11-09 19:37:00
I'm wondering if the M0110A keyboard works on a Macintosh 128K? If so, will arrow keys work too?
|
Posted by: Mighty Jabba on 2019-11-09 23:25:56
I haven't actually tried this, but I'm sure it will work -- the only question would be if you were using a very early version of the OS from before that version of the keyboard existed. I'm not sure about the numpad/arrows in that case.
|
Posted by: giolicious on 2019-11-10 00:31:02
I’m doing a ps2 keyboard to mac conversion using Arduino and just want to make sure about the arrow keys.
|
Posted by: Byrd on 2019-11-10 01:32:27
100% will work fine; note Apple offered an additional external numeric keypad for the 128K style keyboard.
|
Posted by: Crutch on 2019-11-10 20:31:40
Yeah. It works. I use mine with a 128k. I prefer having arrow keys.
|
Posted by: giolicious on 2019-11-11 00:27:33
Yeah. It works. I use mine with a 128k. I prefer having arrow keys. Thank you guys!
|
Posted by: Dog Cow on 2019-11-11 07:12:55
the only question would be if you were using a very early version of the OS from before that version of the keyboard existed. I'm not sure about the numpad/arrows in that case. Correct. The arrow keys and some of the other keys which the Plus keyboard added are dependent on System file support. As long as you're using System file version 3.0 or later (1986), you should be fine.
You can also copy the appropriate INIT resources from a newer System file into an older System file, if need be.
|
Posted by: Crutch on 2019-11-11 08:07:36
That’s interesting @Dog Cow. I trust you, recall similar things (arrow key support in TextEdit wasn’t documented until Inside Macintosh Volume IV, for example) and haven’t tried mine with older System Software, but ... the numeric keypad available with the 128k Mac in 1984 had arrow keys. Did they not do anything? Or require dedicated application support through GetKeys() or similar?
|
Posted by: Dog Cow on 2019-11-11 10:21:20
the numeric keypad available with the 128k Mac in 1984 had arrow keys. Did they not do anything? Or require dedicated application support through GetKeys() or similar? Those technically weren't arrow keys, and instead Apple called them "field motion keys." They work in Microsoft Multiplan and probably other spreadsheet applications. See Inside Macintosh, volume 1, page I-36.
By the way, the Macintosh can tell whether a keypress came from the main keyboard or from the keypad, even if it's a key which is common to both.
|
| 1 |